Acoustic Screens

Offices
Ilmava Table Screen

The basic idea of the Ilmava product is the fabric finish on both sides of the panel and a thinned and finished edge. Thus Ilmava products can be visually mounted on a central location of a room.

The acoustic properties of Ilmava products depend on their installation. In the wall installation, the sound gets through the panel and bounces back from the wall thus getting twice through the product. The acoustic characterisctics are then the same as those of fabric covered wall mounted Yeseco producs. In the free space installation, the sound gets through the product only once and the achieved attenuation is different, but now both surfaces absorb the sound and the absorption area is doubled.

The Ilmava products are manufactured using standard Yeseco fabrics. The color of the fabric can be selected on each side individually, and even a photo printing is possible.

There are two models of the Ilmava Table Screens: on the table standing one and on the table edge mounting one.

Table edge mounting Ilmava Table Screen
HxV
80×40
80×50
80×70
80×80
120×40
120×50
120×70
120×80
Brochure
Toimistot
ilmava-poytasermi-yeseco-2
ilmava-poytasermi-yeseco-1
Transmute Table Screen

Transmute Table Screen has a fabric made hood. They are manufactured according to the dimensions desired by the customer. The maximum height or the width of the table screen is 120 cm, the other dimension is free.

There are two models of the Transmute Table Screen: On the table standing one and on the table edge mounting one.

Brochure
transmute-poytasermi-yeseco-1
transmute-poytasermi-yeseco-2
transmute-poytasermi-yeseco-3
transmute-poytasermi-yeseco
Ilmava Floor Standing Screens

Yeseco’s Ilmava- Screens are excellent solution for solving biggest perceived problem in Open Plan Offices – noise. They reduce echo and improve sound privacy by limiting the spreading and lowering the level of sound disturbances caused by office conversations. The effectiveness is based in good sound absorption of the panel and in good sound attenuation of the through the panel sounds.

The pattern of the Wave- Screen designed by Johanna Örn creates a nice depth and gives character to the screen as well as sound reduction in the room. Simplicity and quality of good design lasts in the long run. Johanna’s vision is to create unique products that make everyday life more beautiful.

The given Screen measures are the sizes of the panels.  The feet of the screens increase the height of the Sceens. Bent birch feet raise the top of the Wave and Office Screens by 10 cm and the feet of the Day care Screen raise the height by 5 cm.

 

Wave Screen 100×160
Office Screen 100×140 and 100×160
Day Care Screen 80×120
BrochureBrochureBrochure
Wave
Toimistosermi
ilmava-lattiasermi
Transmute Floor Standing Screen

Transmute Floor Standing Screens have a fabric hood. They are manufactured according to the dimensions desired by the customer. The maximum height or the width of the floor standing screen is 120 cm, the other dimension is free.

Brochure
transmute-lattiasermi-1
transmute-lattiasermi-2
transmute-lattiasermi-3
Ilmava Hanging Screens

Attenuation of a glass wall or a window surface is easy with a hanging acoustic screen. The hanging is done with two fastening wires attached to the ceiling. Multiple screens can be connected to each other with a Velcro-type strap.

Hanging Ilmava Screens
80×32
80×80
120×40
120×45
120×60
120×80
Brochure
riippuvat-sermit
ideat-yeseco-2
Acoustic Space dividers

Yeseco space dividers consist of a MDF plate separating the sides and the acoustic panels optionally either on one or both sides. The acoustic panels itself can be made using Still, Muffle or Transmute products. A space divider can be installed hanging and anchored to the floor leaving some space for easy cleaning under it.

Brochure
riippuva_sermi